Friday, September 23, 2011

Toys For Sale--Dolls For Kids And Collectors

                                                        



Collecting dolls either antique or modern is one of the most popular hobbies for females today. Adult women collect valuable antique dolls, special edition Barbie dolls, or a host of other collectible genres. They frequent online auctions such as eBay, to keep an eye out for the dolls they want for their collections. Other sources are antique dealers and antique shows.

Young girls are usually more interested in modern dolls such as Barbie or Bratz or many other presently made lines. Generally these can be had for a few dollars and up depending on the particuilar doll and where it is purchased. Fairly common late model Barbies show up frequently in all kinds of  places such as thrift stores, garage sales and online. Sometimes they can be found in bulk lots costing a dollar or less per doll.

Antique dolls can be very expensive bisque dolls from the 19th century, which generally run from fifty up to several thousand dollars, or can in fact be much lower cost collectibles such as composition, cloth or early plastic dolls which may only cost from a dollar or two up to several hundred dollars. People tend to collect what they can afford to buy. If money is no object then expensive bisque dollas are a good investment. If funds are somewhat more limited then the lower priced bisque dolls can be purchased for around one hundred dollars and up. With less funds to invest it is much better to collect interesting composition or cloth dolls which may run from just a few dollars and up.

Examples of bisque dolls are Bru dolls, which usually sell for figures in the thousands, or Armand Marseille which is more likely to be in the hundreds of dollars. The reason for the difference in values is scarcity and quality. Bru dolls were made in relatively small numbers and are of top quality. Armand Marseille dolls were made in large numbers, and are generally of good but lesser quality than the Bru. Modern reproductions of antique bisque dolls are readily available, and some are beautiful and of high quality. Their investment value is however another story as they are unlikely to increase in value as the true antiques do.

Special edition Barbie dolls are manufactured in limited numbers in order to retain value. To be of collector interest these must be in mint condition and in the original packaging. This generally applies to all modern collector dolls. Once removed from the packaging they are worth only a fraction of the original value. As a matter of interest here,  it is certainly a fact that any old toy which is in its original packaging and in good condition, will be worth a great deal more than the same toy with no box. Collectors will pay a premium price for MIB items of any kind. MIB is a term you will come across which is used to describe toys or any other collectibles which are Mint In Box.


                                                                   



The following information is quoted from http://en.wikipedia.org/wiki/Doll

During the 19th century dolls' heads were often made of porcelain and combined with a body of leather, cloth, wood, or composite materials, like papier-mâché or composition, a mix of pulp, sawdust, glue and similar materials.[18][19] With the advent of polymer and plastic materials in the 20th century, doll making largely shifted to these materials. The low cost, ease of manufacture and durability of plastic materials meant new types of dolls could be mass produced at a lower price. The earliest materials were rubber and celluloid. From the mid-20th century soft vinyl became the dominant material, in particular for childrens dolls.[20][21] Beginning in the 20th century, both porcelain and plastic dolls are made directly for the adult collectors market. Synthetic resins like polyurethane resemble porcelain in texture and are used for collectible dolls.

Collectors make a distinction between china dolls, made of glazed porcelain, and bisque dolls, made of unglazed bisque porcelain. A typical antique china doll has a white glazed porcelain head with painted molded hair and a body made of cloth or leather. The name comes from china being used to refer to the material porcelain. They were mass produced in Germany, peaking in popularity between 1840 and 1890, and selling in the millions.[22][23][24] Parian dolls were also made in Germany, from around 1860 to 1880. They are made of white porcelain similar to china dolls but the head is not dipped in glaze and has a matte finish.[25] Bisque dolls are characterized by their realistic, skin-like matte finish. They had their peak of popularity between 1860 and 1900 with French and German dolls. Antique German and French bisque dolls from the 19th century were often made as children's playthings, but contemporary bisque dolls are predominantly made directly for the collectors market.[24][18][26]


Up through the middle of the 19th century, European dolls were predominantly made to represent grown-ups. Child-like dolls and the later ubiquitous baby doll did not appear until around 1850.[24][27] But by the late century baby and child-like dolls had overtaken the market.[24] Realistic, lifelike wax dolls were popular in Victorian England.[28]:

18.^ a b An Introduction to Bisque Dolls - About.com: http://collectdolls.about.com/od/dollprofiles/p/bisquedolls.htm?rd=1
19.^ Glossary of Doll Collecting Terms - Composition - About.com: http://collectdolls.about.com/od/dollcollectingglossary/g/composition.htm?rd=1
20.^ Fraser 1973, pp. 81–83  Fraser, Antonia (1973). Dolls. Octopus books. ISBN 0706400569.
21.^ Vinyl Dolls - An Introduction to Vinyl Dolls - About.com: http://collectdolls.about.com/od/dollprofiles/p/vinyldolls.htm
22.^ Coleman, Dorothy S., Elizabeth A., and Evelyn Jk. (1968), "China Head Dolls", The Collector's Encyclopaedia of Dolls Volume One, London: Robert Hale, pp. 118–134, ISBN 0709055986
23.^ An Introduction to China Dolls - About.com: http://collectdolls.about.com/od/dollprofiles/p/chinadolls.htm?rd=1
24.^ a b c d A Brief History of Antique Dolls, Part II - About.com: http://collectdolls.about.com/library/weekly/aa033199.htm?rd=1
25.^ Krombholz, Mary Groham, German Parian Dolls, 2006, Reverie Publishing, pg. 7
26.^ Christopher, Catherine (1971). The complete book of doll making and collecting. Dover Publications. pp. 187–190. ISBN 0486220664.

Source: http://en.wikipedia.org/wiki/Doll

You can find more information about dolls at our website Click Here

Where can you buy dolls. You can find the best selection anywhere, many with big discounts, through this link to Amazon: Dolls

Wednesday, September 21, 2011

The Razor A Push Scooter or Kick Scooter

                                                             


The Razor A is the original kick scooter which started the scooter craze. It is a great machine for young kids and teenagers to use  for getting from place to place over relatively short distances. It needs just a few pushes with the foot to propel it at a good speed, and gets you where you want to go really quickly. In addition to its utility it is real fun to use as your kids will tell you.

The Razor A scooter is built using top quality aircraft grade aluminum,  which is very strong and can take lots of use and even abuse for years. The upright T tube folds down over the stand-on deck to make a very compact item, which is easily carried when not in use. Weight is about 6 pounds so it is not a great burden, and can go in a backpack or under the arm.

The patented rear fender brake works smoothly and stops you quickly. The 98mm urethane wheels have great bearings and give a smooth ride along the sidewalk.

The manufacturer recommends the Razor A scooter for kids 5 and up, and it is rated for up to 143 pounds carrying capacity which means that a small adult can use it to.  This is a great scooter at this low price and is covered by a 6 month warranty.


                 

Specifications of the Razor A scooter:

Aircraft-grade aluminum upright tube and stand-on deck.
98mm urethane wheels with ABEC-5 bearings.
Rear fender brakes
33 inches handlebar height (from wheel to handlebar)
6 pounds weight
143 pounds maximum capacity
Folded down size: 23.75 x 4x 7.25 inches

The manufacturer Razor USA LLC holds worldwide rights to the Razor© brand and is based in Cerritos California. They manufacture other scooters, including electric scooters.

The scooter is recommended for 5 year olds, and up through teenagers to light adults. With its capacity of 143 pounds it is usable by a good percentage of the population, and heavier duty models are made for heavier people's use. My 4 year old son is big for his age and I bought one for him. He loves it and quickly learnt how to use it extremely well. He rides it to visit friends who are half a mile away, and gets there in no time flat. He just loves his Razor a scooter, and I am really glad I got it for him. Lots of other kids in the neighborhood got one when they saw him riding it.

For more information about the Razor a kick scooter check out our website Click Here

Where can you buy a Razor a scooter? You can get a really good deal at the lowest price through this link to Amazon:  Razor A Scooter



For more information about the Razor a scooter check out our website




                                                       

Tuesday, September 20, 2011

Barbie Dolls And Accessories For Collectors

                                                               


Barbie was 50 years old in 2009. Oh boy! Don't you wish we all looked as young as she does at 52? Well, she did have quite a bit of plastic surgery over her lifetime. In fact she had a total body replacement.

Barbie was first sold in 1959 by Mattel, and many millions of Barbie dolls, as well as accessories, have been sold around the globe since that year. March 9th 1959 Barbie's debut was at the New York Toy Fair and that is her official birthday.

She wore a one piece black and white zebra stripe swimsuit withhigh heel open toe shoes and hoop earrings and sported snazzy white sunglasses which had blue lenses. She came with either blonde or brunette hair which was pulled back in a ponytail and she had very much arched eyebrows and her eyes had white irises.

Unfortunately she was made from a type of plastic which fades to white over time. She was made with copper tubing inside her legs and had holes in her feet for mounting on a pedestal. She had the mark JAPAN on the base of her right foot and her body she was marked with Barbie TM Pats. Pend. Copyright MCMVIII.

Should you get unbelievably lucky and find one of these original Barbie dolls in good condition, you have found a collectors dream item which is worth quite a sum of money. The actual value will depend on the overall condition and completeness of your find. If any parts are missing or there is any damage, this will lower the value of the doll very considerably. This original doll is known to collectors as the #1 Ponytail Barbie.

The #2 Ponytail Barbie is exactly the same as #1, but without the copper tubing in the legs, or the holes in the feet of the doll. The pedestal type was changed completely, and now had extensions to hold the doll in place.

The #3 Ponytail Barbie is nearly identical to #2 but with different eyebrows, and the eyes have blue irises. She came with either brown or blue eyeliner.

The #4 Ponytail Barbie was manufactured from a different, and non fading plastic which can retain it's flesh color over time. She came with blue eyeliner.

The #5 Ponytail Barbie changed to a hollow plastic body from the solid plastic body used in earlier editions. The body markings are quite similar with the slight difference that she is now marked R Pats. Pend. instead of TM Pats. Pend. A new hair color which was named titian was added to the blonde and brunette colors.

Dolls which have this titian hair color are considerably scarcer and are as a consequence of higher value than the brunette or blonde varieties. Some dolls developed a problem with the plastic which changed to a greasy look over a period of time. The matte faced doll,if you can find one,is of more value than the greasy faced doll.

The #6 Ponytail Barbie was manufactured using a vinyl type plastic, which does not become greasy looking with time. The lips and fingernails are a pinkish red, rather than the previous bright red. She is clad in a red swimsuit and has open toe,red,shoes.

The #7 Ponytail Barbie was made with different hair colors including brunette, titian,lemon blonde and ash blonde. Her lips and the nails are coral red in color. This new Barbie edition was made in the 1962-1963 era and the markings changed to "Midge TM copyright 1962/Barbie copyright 1958 by Mattel".

Dolls which are stamped with this new mark are often classed as the #7 Ponytail Barbie but some collectors insist on including them as #6. Dolls which were made before the 1962 change-over are somewhat more difficult to find, and consequently are worth more than the new edition dolls are.

Condition is the dominant factor in putting a value on old Barbie dolls. Collectors want dolls which are clean, fully original and have no damage to them. Dolls in this condition fetch the absolute best price. If in addition the Barbie is in the original factory packaging, and also in mint condition, this constitutes a very desirable collectors Barbie doll and brings a premium price on the collectors market. Any doll which has repairs, restoration or has been repainted is worth a lot less than those which are in the faded but original condition.

Where can you locate early collectible Barbie dolls? The answer to this is almost averywhere you go, if you know what you are looking for. Most people have absolutely no idea of what an old Barbie doll appears like or even that it has collector value. Collectors find old Barbie dolls sometimes by searching in thrift shops or second hand stores, sometimes in flea markets and even in garage sales. Be sure that you take a magnifier with you to read the markings on the Barbie dolls, when you go out to hunt for them. Best of luck in your search.

Where can you buy Barbie dolls new and used? Right now you can find great deals,some with discounts,through this link to Amazon:
Barbie Dolls

Monday, September 19, 2011

The Syma S107G Model RC Helicopter

                                                                


The Syma S107G RC model helicopter can be bought for under $20 at times, but the price can vary considerably. For around $20 it is great value in comparison to some very expensive RC model helicopters.  I am saying that the performance the Syma S107G gives is great value for the price, but not that it is a better machine than the more expensive models. It is not, but its performance is comparable to them in every way generally speaking.

The Syma S107G comes with 3 way controls but the performance it gives compares quite well with the very expensive ($150) Blade MCX2 model which comes with 4 way controls. The helicopter  certainly is fun to operate, perhaps more fun than the ultra smooth flying Blade helicopter model. The Syma's  flying is certainly less smooth, and it will take a little more skill to fly it at its best, but this factor really adds to the flying fun, and at it's price the model gives an amazing performance..
The rotor blades on the helicopter produce a sound unlike any other model I have come across, and this actually provides  more enjoyment as the model climbs beautifully into the air and hovers precisely.
The Syma S107G feels solid, and the quality of the finish detail is very nice and well fitted. The Li-PO battery which it uses must be handled correctly to give its best performance. Some owners do not know this, and it is easy to ruin the battery very quickly by  attempting to overcharge it.

When the battery is fully charged, you must stop charging immediately. If you leave the battery on the charger damage will result, and battery life will be shorter. Spare batteries are to be had for $5 or so on Amazon, and having one or two of these is a good idea. The Syma S107G will fly for around 10 minutes per charge,  then the battery must be allowed to cool for 15 to 30 minutes, and then recharged for some 30 to 40 minutes. Be sure to cool the battery  before recharging after use.
The helicopter has 3  control modes,  to fly it with. It can go up/down,  by using the left throttle control stick. Forward/back and rotate left to right, are done with the 4 way right stick. There is no direct control to give left to right movement . The Syma is of rugged construction when compared to some other models and  as a result of this can survive crashes much better. Landing a model helicopter requires you to have some practice, and crash landings are common at first,  making the crash survival rate important.
The Syma S107G is, in my humble opinion, a terrific buy, and compares very well to several more expensive models I have owned.

My  present Syma helicopter has been in service for 2 years, and has survived numerous crashes. The built in gyro, the model is equipped with, makes flying very simple, since it makes the helicopter easy to control and very stable. The model hovers really nicely if you can keep the throttle control steady. It can be steered accurately in all directions, and it is easy to fly this helicopter without crashing it. The fun experience this helicopter provides, is a  solid bargain at this really low price.

Where can you buy a Syma S107G helicopter? At present it is available with a hugely discounted price through this link to Amazon: Syma S107G

Friday, August 26, 2011

Nintendo Games

Prior to introduction of the Nintendo Game Cube all Nintendo games were on cartridges.
The Nintendo Game Cube was introduced to the market in 2001. This was the first Nintendo console with optical disc storage.

The newest Nintendo home console, the Wii, has motion sensing controllers, and has online functionality for services such as Nintendo Wi-Fi Connection and Internet Channel (in contrast to GameCube which had limited functionality only on certain games by means of an additional modem).

The Wii's success, and the success of the DS, introduced a new broader audience with non-traditional demographics. This business model has been successful for Nintendo. However this new business model has also caused some gamers to abandon the Nintendo console, and move over to some of its competitors.

Nintendo's new home console, the Wii U, was introduced on June 7, 2011 at the Electronic Entertainment Expo. Where can you buy Nintendo games? Right now you can get a great selection both new and used at the very lowest prices through this link to Amazon:  Nintendo Games

For more information about Nintendo games and other toys check out our website Toys for Sale

Saturday, August 6, 2011

Collecting Action Figures


                                                                   

Serious collecting of Action figures increased rapidly during the 1980s. Serious collectors began to buy the toys and keep them in their original packaging for display as collectibles rather than as toys. This forward surge in collecting led to the toy companies producing a huge numbers of action figures.

One of the most popular series, Teenage Mutant Ninja Turtles action figures were produced in such huge quantities that their collector value was seriously diluted and remained very low. During the  1990s decade Spawn Star Wars figures were produced in massive quantities and action figures were no longer just childrens toys. ToyFare magazine which was a new publication recording news and nostalgia about collectible toys became popular with mature collectors.

As the Internet surged forth in the late 1990's, websites such as Toy News International were created to publish information about collectible action figures.
Some very popular action figures were dressed in specialized types of costumes. Batman for example was produced in a wide array of different figures including Arctic Batman, Neon Armor Batman and Piranha Blade Batman to name a few. Glow-in-the-dark figures and accessories for them started to become popular in the early 1990s, including such favorites as Swamp Thing and Toxic Crusaders. The figures as a whole became much more muscular in build, and far exceeded the muscular build of even the greatest human body builders.

The collector market for many types of action figures is presently growing rapidly with companies including McFarlane Toys, NECA and Palisades producing very popular action figures. These are of course intended as display items rather than simply as toys, but some figures while aimed at children, such as the revival of Justice League Unlimited, and Masters of the Universe, are sought as adult collectibles also. Comic book figures which are popular with some collectors are produced by companies such as DC Direct and Toy Biz.

Certain adult-oriented  collectible action figure lines are sold exclusively by chain stores rather than other smaller retail outlets. Some popular figures are often made available only by means of mail-in offers, and at comic book conventions which raises their collectible values due to lower production numbers.  Such unfortunate and devious promotional ideas as intentional packaging "errors" and "short-packed" figures have been known to be used by certain toy companies for the express purpose of creating collectible value in these "Errors".

Where can you buy action figures. Right now you can get the very lowest prices including some big discounts through this link to Amazon:  Action Figures

For more information about toys and collectibles see our website at http://www.toysforsalewebsite.com/actionfigures.html.

Monday, August 1, 2011

Collecting Hot Wheels Cars

                                                                    

The Mattel company began producing Hot Wheels cars in 1968. Their Barbie dolls had been a huge success in the girls market, and they hoped to attract boys with hot wheels cars. They very definitely got this right. Hot Wheels are collected nearly everywhere around the globe, and have been a total success story from the start.

During their first year of production in 1968 there were 16 different Hot Wheels cars in production. This first produced line is now known as the "Sweet Sixteen" among collectors. These 16 different cars were made in various colors and were manufactured in the United States and also in factories in Hong Kong. By the year 1972 all of Hot Wheels cars were being made in Hong Kong.

From the start in 1968 to the year 1977 all Hot Wheels cars were made with a red line painted around the tires. These early cars are known as Redline Hot wheels which distinguishes these first cars from later production models. Nine of the "Sweet Sixteen" were customised editions of actual real cars of that time and the other seven were show cars and racing cars.

Redline Hot Wheels cars are easily recognised by  

A. Bright shiny metallic "Spectaflame"  paint in bright colors.
B. A red line around the side of the tires on all models.
C. Chrome wheel hubs and rims. 
D. The redline Hot Wheels models were all customised in a  hotrod or custom fashion.

A beginner starting to collect Hot Wheels cars will find it a good idea to start their collection with the current year models. They  are obviously easy to obtain in stores, and cost less than earlier cars which have added collector value. Mattel Hot Wheels check lists are available to keep records of your collection. You can then gradually work back through the earlier years and add cars to your collection when you come across good deals or make trades trading with other Hot wheels collectors.

Where can you buy Hot Wheels vehicles and accessories? Right now you can get a terrific deal at the lowest prices through this link to Amazon:  Hot Wheels

For more information about Hot Wheels cars and many other collectible toys see our website.